
Preventative Maintenance
Your heating and air conditioning system needs regular preventive maintenance to operate at optimum levels throughout its life. For example, a dirty condenser coil can cause the compressor to run harder and pull more amps. More amps equates to higher electric bills. A dirty condenser coil also makes your compressor work harder and could eventually cause premature failure of that compressor.
Our HVAC Preventative Maintenance Plan Members Receive:
- 10% Discount on parts & labor
- Priority service – tell us you’re a Plan member when you call, and you will be given top priority in our service schedule!
- Multiple system discounts
- All for the equivalent of your car’s annual oil changes
Every Visit We Will Check for the Following:
- Clean and/or replace filters
- Check electrical connections on HVAC equipment
- Check low voltage connections
- Check thermostat calibration
- Lubricate fan motor
- Measure voltage and amperage draw on all motors
- Check system air flow
- Clean blower if needed
Air Conditioning System Checklist
- Clean condenser coil
- Oil motors if applicable
- Inspect evaporator coil
- Check operating pressure for proper refrigerant range
- Check “start” and “run” capacitors & relays
- Check and record refrigerant pressure levels
- Check primary and secondary condensate drains
- Monitor air conditioning cycle
Heating System Checklist
- Inspect heat exchanger for cracks or corrosion
- Check and adjust pilot operation as needed
- Check and lubricate blower housing, motor, and condenser fan
- Leak test gas line from heater shutoff to burners
- Monitor furnace cycle
- Check thermostat operation and mounting
- Inspect heating elements